Informasi setting modem   Leave a comment

Informasi setting modem yang digunakan untuk layanan Telkom Speedy Adsl Modem SMC Default IP: 192.168.2.1 Default password: smcadmin Setting Bridge: Klik WAN Clik ATM PVC Klik VCI Protocol: 1483 Bridging, VLAN: Default, VPI/VCI: 8/81, Encapsulation: LLC, Qos Class: UBR, PCR/SCR/MBS: 4000/4000/10 Klik Save Settings SMC Setting PPPoE: Klik WAN Klik ATM PVC Klik VCI Protocol: PPPoE, VPI/VCI: 8/81, Encapsulation: LLC, QoS Class: UBR, PCR/SCR/MBS: 4000/4000/10, IP assigned by ISP: Yes, IP Address: 0.0.0.0, Subnet Mask: 0.0.0.0, Connect Type: Always Connected, Idle Time (Minute): 5, Username: nmrspeedy@telkom.net, Password: (password dari telkom), Confirm Password: , MTU: 1492 Save Settings Adsl Modem ZyXeL P-660R Default IP: 192.168.1.1 Default username: admin Default password: 1234 Setting Bridge Pilih Network Pilih WAN Mode: Bridge, Encapsulation: RFC 1483, Multiplexing: LLC, VPI: 8, VCI: 81, Apply Pilih Maintenance Pilih Tools Restart Setting PPPoE Pilih Network Pilih WAN Mode: Routing, Encapsulation: PPPoE, Username: ( nmrspeedy@telkom.net), Password: (password speedy), Service Name: Speedy, Multiplexing: LLC, VPI: 8, VCI: 81, IP Address: Obtain an IP Address Automatically, Connection: Nailed-Up Connnection, Apply Klik Maintenance Klik Tools Restart Adsl Modem Shiro Default IP: 192.168.1.1 Default username: admin Default password: admin Setting Bridge: Klik Advanced Klik WAN Klik New Connection Connection Name: Speedy, Type: Bridge, VPI: 8, VCI: 81, and Submit Save Settings Restart Router shiro Setting PPPoE: Pilih Advanced Pilih WAN Klik New Connection Connection Name: Speedy, Type: PPPoE, Sharing: Enable, Encapsulation: LLC, Username: nmrspeedy@telkom.net, Password: (password dari telkom), VPI: 8, VCI: 81, and Submit Save Settings Restart Router shiro pppoe Adsl Modem Aztech Default IP: 192.168.1.1 Default username: admin Default password: admin Setting Bridge: Klik Advanced Klik WAN Klik New Connection Connection Name: Speedy, Type: Bridge, VPI: 8, VCI: 81, and Submit. Save Settings Restart Router Setting PPPoE/Router: Klik Advanced Klik WAN Klik New Connection Connection Name: Speedy, Type: PPPoE, Sharing: Enable, Encapsulation: LLC, Username: nmrspeedy@telkom.net, Password: (password dari telkom), VPI: 8, VCI: 81, and Submit. Save Settings Restart Router Adsl Modem TECOM AR1031 Default ip: 192.168.1.1 Default username: admin Default password: admin Setting Bridge: Klik Advanced Setup Klik WAN Klik Edit ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next Connection Type Bridging, Encapsulation Mode LLC/SNAP-BRIDGING, Next Cheklist Enable Bridge Service, Service Name: Speedy, Next WAN Setup – Summary, Save Save/Reboot tecom Setting PPPoE: Klik Advanced Setup Klik WAN Klik Edit ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next Connection Type PPP over Ethernet (PPPoE), Encapsulation Mode LLC/SNAP-BRIDGING, Next Put your PPP Username: nmrspeedy@telkom.net; PPP Password: (password dari telkom); PPPoE Service Name: Speedy, Next Cheklist Enable WAN Service, Service Name: Speedy, Next WAN Setup – Summary, Save Save/Reboot tecom pppoe Adsl Modem Billion Setting: Login To: http://192.168.1.254 User name = admin; Password = password dari telkom Klik -> OK Klik: Quick Start Edit Connection: Encapsulation = PPPoE LLC Bridge = Enabled Setting VPI = 8 dan VCI = 81 , and Than Static IP Setting IP Address = 0.0.0.0 subnet mask = 0.0.0.0 Gateway = 0.0.0.0 Klik: – Submit – SAVE CONFIG Klik: Submit Wait Till process Configuration done ! Configuration Done ! Modem Prolink Login To -> http:// 10.0.0.2 User Name: admin Password: password Klik . . . . OK Chose Configurasi WAN: Select Adapter: Pilih Pvc3 (Indonesia) Edit Field: Bridge = Enable Encapsulation = 1483 Bridge IP LLC ATM VPI = 8 ATM VCI = 81 prolink Static IP Setting: “ just blank “ IP Address = just empty Subnet Mask = just empty Gateway = just empty User Name = username@telkom.com. . . . . . ( optional ) * Password = xxxxxxxx . . . . . . . . . . . . . . . . . . .( optional ) * * If you choose to put username & password there just double clik explorer * If you not choose to put username & password there you have to create new connection at Network Connection Create New Connection (Bridge) See here..>> Than Next: * Klik Submit * Klik Save Configuration Next: Save Reboot …. Adsl Modem D-Link DSL-302T Default IP: 192.168.1.1 Default username: admin Default password: admin Setting Bridge: Klik Setup Klik Connection Bridge Connection Setup. Name: Speedy; Type: Bridge; Encapsulation: LLC; VPI=8; VCI=81, Apply Klik Tools Klik System Commands, Save All, Restart d-link Setting PPPoE/Router: Klik Setup Klik Connection Bridge Connection Setup. Name: Speedy; Type: PPPoE; Username: nmrspeedy@telkom.net; Password: (password dari telkom); VPI=8; VCI=81, Apply Klik Tools Klik System Commands. Save All, Restart d-link2 adsl Modem Repotec Buka Internet Explorer ketik: http://192.168.1.1 Username: admin & Password: epicrouter Klik: OK Klik WAN Pic Adapter: Pvc0 Klik Submit Virtual Circuit = Enabled Bridge & IGMP = Disable Each region was different from another region and for Bandung vpi:8 , vci: 81 Service Category = UBR without PCR Protocol/Conection type = PPPoE Encapsulation = LLC/Snap-Bridging Put Username & Password from your provider Klik Submit. Klik Save Configuration (wait till Saving configuration done.) put DNS: 202.134.0.155 & 202.134.2.5 Adsl Modem Dareglobal Default IP: 192.168.1.1 Default username: admin Default password: admin Setting Bridge: Klik Advanced Setup Klik WAN Find VPI/VCI: 8/81, Klik Edit ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next Connection Type Bridging, Encapsulation Mode LLC/SNAP-BRIDGING, Next Cheklist Enable Bridge Service, Service Name: Speedy, Next WAN Setup – Summary, Save Save/Reboot Setting PPPoE: Klik Advanced Setup Klik WAN Cari VPI/VCI: 8/81, Klik Edit ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next Connection Type PPP over Ethernet (PPPoE), Encapsulation Mode LLC/SNAP-BRIDGING, Next Put your PPP Username: Nomorspeedy@telkom.net; PPP Password: (password dari telkom); PPPoE Service Name: Speedy, Next Centang Enable WAN Service, Service Name: Speedy, Next WAN Setup – Summary, Save Save/Reboot Adsl Modem TP-Link Default IP: 192.168.1.1 Default username: admin Default password: admin Setting Bridge: Klik Advanced Setup Klik WAN Find VPI/VCI: 8/81, Klik Edit ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next Connection Type Bridging, Encapsulation Mode LLC/SNAP-BRIDGING, Next Cheklist Enable Bridge Service, Service Name: Speedy, Next WAN Setup – Summary, Save Save/Reboot dareglobal Setting PPPoE: Klik Advanced Setup Klik WAN Find VPI/VCI: 8/81, Klik Edit ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next Connection Type PPP over Ethernet (PPPoE), Encapsulation Mode LLC/SNAP-BRIDGING, Next Put your PPP Username: nmrspeedy@telkom.net; PPP Password: (password dari telkom); PPPoE Service Name: Speedy, Next Cheklist Enable WAN Service, Service Name: Speedy, Next WAN Setup – Summary, Save Save/Reboot Setting Modem Articonet ACN-100R dan ACN-110 Cara melakukan setting di komputer untuk akses ke modem Articonet. Untuk setting di komputer dilakukan sesuai dengan operating system yang dipakai di komputer pelanggan, disini yang dibahas khusus untuk Windows XP. Lakukan network setting di PC (komputer) sbb: a. Start – Control Panel – Network Connection b. arahkan kursor pada Local Area Connection yang aktif, kemudian klik kanan dan pilih properties c. kemudian pilih menu Internet Protocol (TCP/IP) dan klik 2X, maka akan muncul menu General. d. Pilih Obtain an IP Address Automatically kemudian pilih Obtain DNS server address automatically, kemudian tekan tombol OK. Panduan cara setting modem ADSL Speedy koneksi PPPoE.(PPPoE) Setting modem dilakukan melalui browser dengan mengakses alamat http://192.168.1.1 Masukkan username dan password: admin/admin Setelah masuk ke menu setting lakukan langkah berikut: Masuk ke menu “Advanced Setup” kemudian pilih “WAN” dan klik tombol “Edit” disebelah kanan tabel WAN Masukkan nilai PVC Configuration: (masukkan nilainya sesuai wilayah TELKOM masing-masing daerah) VPI = X VCI = XX Service Category = UBR Without PCR, kemudian klik tombol Next Connection type = PPPoE Encapsulation = LLC, kemudian klik tombol Next Masukkan username dan password Speedy, kemudian klik tombol Next Tandai atau kasih v untuk pilihan “Enable WAN Service”, kemudian klik Next dan klik tombol Save Setting PPPoE untuk koneksi Speedy telah selesai dilakukan Selanjutnya klik tombol Save/Reboot (Modem akan reboot -/+1 menit dan tunggu sampai modem normal kembali) Berikut langkah setting modem ADSL Articonet untuk Dial-Up/Bridge. Setting modem dilakukan melalui browser dengan mengakses alamat http://192.168.1.1 Masukkan username dan password: admin/admin Setelah masuk ke menu setting lakukan langkah berikut: Masuk ke menu “Advanced Setup” kemudian pilih “WAN” dan klik tombol “Edit” Masukkan nilai PVC Configuration: (masukkan nilainya sesuai wilayah TELKOM masing-masing daerah) VPI = X VCI = XX Service Category = UBR Without PCR, kemudian klik tombol Next Connection type = Bridging Encapsulation = LLC, kemudian klik tombol Next Tandai atau kasih v untuk pilihan “Enable Bridge Service”, kemudian klik Next dan klik tombol Save Setting Bridge untuk koneksi Speedy telah selesai dilakukan Selanjutnya klik tombol Save/Reboot (Modem akan reboot -/+1 menit dan tunggu sampai modem normal kembali) Setting modem Articonet untuk koneksi Bridging sudah selesai, langkah berikutnya setting koneksi Dial-Up di PC/komputer. Panduan instalasi Dial Up koneksi ADSL menggunakan Windows 2000: Klik Start, klik Setting,klik Control Panel, Klik Network and Dial Up Connections. Klik Make New Connection, klik Next, Klik Dial Up to the Internet Klik I want to setup my internet manually, klik Next Klik I connect through a phone line and a modem klik Next Pilih dan klik modem ADSL yang sesuai Isi username:15xxxxxxxxxx@telkom.net Password: xxxxxxxx Klik OK dan Lanjutkan sesuai perintah yang muncul Klik Finish Panduan installasi Dial Up koneksi ADSL menggunakan Windows Xp: Klik Start, klik Setting, klik Control Panel. Klik Network Connection Klik Create a New Connection, klik Next. Klik Connect to the Internet, klik Next Klik Setup my connection manually, klik Next Klik Connect Using Dial Up, klik Next Klik modem ADSL yang sesuai, klik Next Isi username: 15xxxxxxxxxx@telkom.net dan Password: ******* Confirm password: xxxxxxxx kemudian beri tanda v pada pilihan “Add a shortcut to the desktop screen” Klik Finish

Posted September 24, 2011 by tofan84 in Uncategorized

Tinggalkan Balasan

Isikan data di bawah atau klik salah satu ikon untuk log in:

Logo WordPress.com

You are commenting using your WordPress.com account. Logout / Ubah )

Gambar Twitter

You are commenting using your Twitter account. Logout / Ubah )

Foto Facebook

You are commenting using your Facebook account. Logout / Ubah )

Foto Google+

You are commenting using your Google+ account. Logout / Ubah )

Connecting to %s

%d blogger menyukai ini: